Volkswagen Key Programming Tips
Volkswagen offers an easy way to replace keys that have stopped functioning or add an additional. The process is simple and cost-effective by following a few tricks.
First, you must locate the correct key fob. It should either come with the keyblade which can be turned upside down or internal to the keyfob. Collect all the necessary documentation to prove ownership. Then, visit the locksmith or dealer.
Immobilizer
The immobilizer is a device that prevents keys that are damaged or unauthorized from starting the vehicle. The system is able to recognize a specific chip inside every key. VW dealers or automotive locksmiths can program additional keys. However, the process requires tools and software. Using the proper tools will ensure an easy programming experience. Before beginning the key programming technicians should recreate the issue to determine the issue. They should also search the vehicle for fault codes, check for technical service bulletins (TSBs) and test the battery inside the key fob.
A Volkswagen key that doesn't have an immobilizer chip shuts off the engine after a few seconds of cranking. The immobilizer chip doesn't stop the alarm from turning on or unlocking doors. The key fob's immobilizer a separate component glued in the flip part of the car key. It has to be programmed on the car's computer in order to function.
Making a new key for an VW is more expensive than creating duplicate keys in the event that all the original keys are lost. The key has to be purchased from the manufacturer, then it is subject to a special programing process to sync up with the car's computers. This can be accomplished by a professional using software such as VagTacho and VCDS. This procedure is recommended for vehicles with the older Immobilizer 2, and older.
Electronic Ignition
The electronic ignition feature of the key is an essential element of the anti-theft technology in a vehicle. The feature is activated when the key fob is inserted in the ignition. However, it is not foolproof. It can be prone to failure, which could cause your Volkswagen's engine not working. This can happen due to a variety of causes, including defective key programming or a damaged car battery.
Fortunately, you can steer clear of this problem by getting your Volkswagen car key fobs programmed professionally. This can be accomplished by a dealer or a locksmith. Prices for this service vary however, they are usually between $90 and $150. These prices are also contingent on the vehicle's model and year.
In order to program the new VW key fob, you will need the primary working key. The new key must also be able to start the engine of the vehicle. This will allow onboard diagnostics to recognize it as a legitimate key. The immobilizer warning light will turn off.
Some models require a threefour-digit PIN code to enable onboard key programming. Some may require a scanner to enable this. Locksmiths or dealers can make use of a specialized scanner to perform onboard key programming. These scanners aren't for sale in general automotive stores, and you will need to either purchase one or borrow it from the dealership.
Keyless Entry
If your Volkswagen key fob is experiencing battery issues, or lost it completely it's possible that the car will start, but cannot unlock. This is a simple issue to fix. First, ensure that the key fob can be visible to the vehicle. If it is in range, press and hold down the lock button until the lights on the key flash for six seconds.
The key fob will now be reset to the nearest location to your VW. You can then unlock the vehicle by pressing the unlock key on the key fob. If the vehicle doesn't unlock after this, you will be required to contact the dealer to have the key programmed.
The process of getting a new Volkswagen key programmed can be expensive. It is best to ask for quotes from several dealers before choosing the best one for you. Also, determine if the dealer charges for key programming and for the new key itself.
A second Volkswagen key is a great idea for many reasons. You may need backup keys in the event of theft or if you lose your primary key. Here are some steps to follow if you own an extra Volkswagen key and want to program it to work with your Volkswagen.
Remote Start
Unlike previous generation key fobs that communicated with the vehicle using radio waves, Volkswagen's remote start systems connect to your car using a secure wireless connection using wireless technology. VW Atlas, Jetta or Passat will detect the proximity of your vehicle to activate features like push-button entry or keyless start. It's as easy as opening the app and connecting your smartphone to your car and pressing the button.
Make certain that your Volkswagen is parked and that the driver's-side door is closed. This will ensure that only the correct key is being used to access your vehicle's features. If the key isn't recognized the dashboard will display an error message. In addition, this option will only work on newer VW models that feature an RFID sensor ring on the steering column. These models require a secret pin number to be programmed.
Close the door to the driver's side and take out the main key to program the new keyfob. Press replacing volkswagen key of the new keyfob. This will inform the vehicle that it's a working key. It will then transmit signals that will allow you to open the door of the driver, and then remotely start your car. Some say it only works when there's clear sight of the car. Some have reported success in parking areas that are packed.